1992 RR County Steering Stabilizer Shock Absorber
Current model is  a Rancho 5403 (C3447)
This shock is SUPER STIFF, I feel it is too stiff for my stock RR, makes my steering feel very thick, hard to turn corners using only one hand... but I've never driven another RR, so this is only my opinion.

My measurements below are based from the mounting plate between the two rubber donut bushings... I don't know if that is where manufacturer's spec their shocks at.

My measurements:
Compressed State: 15 inches
Extended State: 21 inches
Travel: 6 inches

COMPRESSED STATE-

 

 

EXTENDED STATE-

New unit from AB:

 

 

 

 

Site Home                   Ham Radio Page            Range Rover Info Home