CV Joint-Range Rover

Spanish Trail Tech Site

Non standard replacement parts

Re: CV Joint

I think my 95 Classic has developed a bad right side CV. I found the part online for $265 from this source, Is this a decent price and has anyone dealt with them before? Also are there any related seals or bearings I will need to replace when doing the CV? A link to an online repair description or any tips that you could offer would be much appreciated.

Swivel pin bearing preload too low-.

Remove wheel and large seal inside of swivel pin bearing housing, support housing from below, and remove upper swivel pin. Remove some shims and reinstall swivel pin, torque bolts and check tightness. Adjust by adding/removing shims, if needed. Refit seal and wheel. Done. Repeat other side, if needed.

BR, Antti Ahonen Turku, Finland




Site Home                   Ham Radio Page            Range Rover Info Home